Garage Door Co Repair Pros serves Glencoe, IL (zip code(s) 60022) with 241 customers. We provide complete sales, service, installation & repair of residential & commercial sectional overhead garage doors, garage door electric openers, garage door torsion springs, remote controls, keyless entry and more in and around Glencoe, IL. We have 1641 customers in the nearby cities of Glencoe, Winnetka, Wilmette, Northfield and zip codes 60022, 60082, 60091, 60093 which are within 3 miles.
Even though we are a small locally owned business located at 4646 Oakton St (rear) in Skokie, IL serving N/NW Chicago and suburban IL and are NOT A FRANCHISE we service Glencoe every day with NO travel charge. Same day garage door service is provided to Glencoe, IL in many cases. We would love to provide you with the same great service that over 29,300 existing customers have received in Glencoe, IL and the over 121 communities we serve in N/NW Chicago and its suburbs. "Simply competent service at a fair price" is not just our slogan but rather our goal every day.
Pricing has increased due to material and labor cost increases over 100% between 01/01/2021 and 12/01/2021. See Price increases 2021
(includes 20,000+ high cycle torsion springs)
$375 for 300-350 lbs
call for more than 2 springs or heavy wood or carriage metal doors
call for apartment house or commercial applications
(includes 20,000+ high cycle torsion springs)
$250 for 150-175lbs
call for heavy wood or carriage metal doors
above pricing if only 1 spring
is replaced on 2 spring system
(recommended for nearly all doors with extension)
$325 for 1 car hollow steel door
call for wood or heavy metal doors
$145 pair for torsion spring system
only $40 extra with spring replacement
$165 belt drive
deduct $75 if already having service call
$155 for Genie
$155 for Allstar
deduct $80 if already having service call
$150 for Genie
call for other models
(we do NOT install Genie, Xtreme, Ryobi or Mighty Mule systems)
addl costs if door is not reinforced for opener
Have a broken garage door torsion spring in the Glencoe area? We can help. We replace torsion springs on a daily basis in the Glencoe area at a fair price. We provide 20,000+ high cycle torsion springs as standard - not an upgrade. Torsion springs are located on a bar above the garage door When one breaks you will see a gap of an inch or more between the coils. Typical cost for a 2 car residential garage door is ONLY $305 parts and labor to replace both torsion springs. Typical cost for a 1 car residential door is ONLY $200 to replace the single torsion spring. Heavy wood or carriage style doors maybe more expensive and quoted as appropriate. There are NO hidden costs, travel charges to the Glencoe area, inspection fees, lubrication fees, or just because fees like some of our competitors. Our service includes general maintenance, lubrication with PRO21 synthetic garage door lubricant (aka Clopay / Ideal synthetic garage door lubricant) and inspection of the garage door and adjustment of the garage door opener.
Does your garage door opener have bad gears in the Glencoe area? If you hear the garage door motor running but the chain or belt is not moving then there is a very good chance the the plastic gears in the garage door motor unit are stripped or cracked. For garage door openers manufactured by Chamberlain - including Chamberlain, Liftmaster, Sears / Craftsman, Access Master the cost to replace the gear and sprocket assembly (includes both plastic gears, output shaft, sprocket for chain or belt, bushings and lube ie 41C4220A, 41C4885-2, 41C4885-5) in the Glencoe area is ONLY $155 to $165. Just like above discussion on springs this cost includes general maintenance (tune-up) etc. As long as your opener was manufactured after 1992 and has the ir safety beams near the garage floor on both sides of the garage door opening then the gear and sprocket replacement is usually justified.
Is your garage door lift cable broken in the Glencoe area? The garage door cable is the metal cable (wire) that connect the springs to the bottom section of the garage door. When a cable breaks the garage door will usually become uneven (higher on one side than the other) and will usually not be able to open with the garage door opener. The cost to replace both cables on most residential garage doors in the Glencoe area is ONLY $145. Cable replacement is about $40 additional when replacing the torsion springs since you already have the labor costs included in the spring replacement. Cable replacement cost higher on heavy wood or carriage style doors.
Are you ir safety sensors bad in the Glencoe area? Since 1993 all residential garage door openers require self monitoring entrapment protection in order to be sold in the US. Almost all opener manufacturers have opted for the ir safety sensors aka photo eyes to meet the UL325 standard. The standard calls for these sensors to be mounted within 6 inches of the floor with one on each side of the garage door opening. If these sensors are damaged, misaligned, or defective then the garage door opener will not close from the remote control. The standard allows a user within the sight of the garage door to hold the push button / wall console continuously in order to override the problem sensors. There is an aiming light on the sensor system (usually a light on each sensor with the exception of Allstar, Challenger and some Genie). Both aiming lights need to be on steady - not flickering in order for the door opener to close with a remote control transmitter. If the sensors are bad the replacement cost for a pair of photo eyes in the Glencoe area is about $145 including the general maintenance, safety inspection, lubrication etc as described above.
BEWARE OF GARAGE DOOR REPAIR SCAMS in the Glencoe area -- check out these tips and resources we have consolidated from various consumer watchdog groups, TV station sting operations, etc GARAGE DOOR REPAIR SCAMS - CLICK HERE
Top requests in Glencoe (as of 01/02/2022 - 18:37)
Primary service area is N/NW Chicago and Suburban IL including Glencoe and surrounding communities.
WE USE NO "SALESMAN" - ALL ESTIMATES (free for new doors), INSTALLATIONS and REPAIRS BY UNIFORMED SERVICE TECHS (not subcontractors!) IN MARKED SERVICE TRUCKS. Our phone number and address appears on our trucks. We have been using a uniform service since 1998.
"Never a Coupon Required" - see why Why NO COUPONS here
Complete sales, service, installation & repair of residential & commercial overhead garage doors, garage door electric openers, garage door torsion springs, remote controls, keyless entry in Glencoe IL and surrounding communities.
Torsion Springs - Replacement and Conversion
Fast, efficient and FAIR pricing for garage door torsion spring replacement and extension spring to torsion spring conversions in Glencoe IL and surrounding communities. High cycle torsion springs (20,000 cycles+) are not an upgrade but standard at Garage Door Co Repair Pros.
Spring Details » Instructions - TORSION and EXTENSION springs »
We sell residential and commercial garage doors (WOOD, STEEL, GLASS, FULL VIEW, ALUMINUM, INSULATED, CARVED, FIBERGLASS, COMPOSITE, MASONITE, CARRIAGE HOUSE, STANDARD LIFT, HI-LIFT, VERTICAL LIFT, FOLLOW THE ROOF, etc) from most major manufacturers including Amarr, CHI, Clopay, Genie, Haas, Hormann, Ideal, Overhead, Plycraft,Wayne-Dalton in Glencoe IL and surrounding communities. We do NOT sell or service rolling steel garage doors (into a canister) or rolling grilles (into a canister).
We provide FREE onsite estimates for new garage doors in the Glencoe area.
--Click on logo for Garage Door brochures --
--Click on logo for Door Opener brochures --
Manuals & Instructions